0086-15920110298
LMS Cantilever Racking Upright Roll Forming Machine
Do you need a quote or more information?
- 产品描述
-
- Commodity name: LMS Cantilever Racking Upright Roll Forming Machine
Machine Description
Production Flow:
Material → Decoiling → Leveling → Hydraulic Punching → Roll Forming → Welding → Hydraulic Cutting-Off → Final Profile1.Manual Decoiler——1 Set
Max. Width 500 mm Inner Diameter Ø 460 - Ø 520 mm Max. Loading Capacity 3,000 kgs Manual operating type Manual expansion to tighten the coil No power Equipped with brake belt device 2.Leveling Device——1 Set
Max. Width 250 mm Max. Thickness 3.0 mm Rollers for Leveling 9 rollers Material for Rollers GCr15 steel Hardness for Heat Treatment HRC55 – 57 Motor Power 3.0 kw Leveling Speed 8 meters / minute Power Transition by Chains & Gears 3.Feeding Device——1 Set
Max. Width 250 mm Max. Thickness 3.0 mm Rollers for Feeding 4 rollers Material for Rollers GCr15 steel Hardness for Heat Treatment HRC 55 – 57° Servo Motor 1.3 kw, Japanese Feeding Speed 0 – 10 Meters / Minute Power Transition by Gears 4.Hydraulic Punching Machine——1 Set
Working Pressure 80 Tons Hydraulic station motor power 15.0 kw Stoke Per Minute 25 Strokes / Minute Punching Mold 1 Set Hole-Punching Modular 1 Set, 70 mm / Stroke = 2 Rows / Strokes Brand Yangli, China; Top One In China 5.Roll Forming Machine——1 Set
Rollers 22 Nos. Material for Rollers Cr12Mov steel Hardness for Heat Treatment HRC57 – 59 Roller Main Shaft Ø 72 mm, 45# Steel Bearing HRB, China; 60312 Main Machine Side-Wall Thickness 35 mm Motor Power 11.0 kw, 350 Gearbox, each 2 sets Rolling Speed 6 meters / minute Arc welding machine 1 set Arc welding speed 1.5-3 meters per minute Speed Control By Frequency Converter Power Transition by Chains & Gears Equipped with Water Coolant System √ 6.Hydraulic Saw Cutting Device——1 Set
Cut-Off Type Hydraulic; Saw; Automatic Cut-Off Cut-Off Station 1 Set Hydraulic cutting motor power 3.0 kw Hydraulic Pump Stand Motor 0.75 kw Cutting Method not stop to cut, fast cut Length Tolerance Controller By Pneumatic Hole Location 7.Run-Out Table——1 Set
Table Length 6 Meters Structure Welded By Angle Iron Discharge Structure By Pneumatic Cylinder 8.Electronic Control System——1 Unit
PLC Mitsubishi, Japan Frequency Converter Japan Touchable Screen Mitsubishi, Japan Servo Motor Yaskawa, Japan Main Electronic Components Schneider, France Or Shilin, Taiwan Power Supplier 380 V, 50Hz, 3Phs Machine Details
Machine Video
Machine Description
Production Flow:
Material → Decoiling → Leveling → Hydraulic Punching → Roll Forming → Welding → Hydraulic Cutting-Off → Final Profile
1.Manual Decoiler——1 Set
| Max. Width | 500 mm |
| Inner Diameter | Ø 460 - Ø 520 mm |
| Max. Loading Capacity | 3,000 kgs |
| Manual operating type | Manual expansion to tighten the coil |
| No power | Equipped with brake belt device |
2.Leveling Device——1 Set
| Max. Width | 250 mm |
| Max. Thickness | 3.0 mm |
| Rollers for Leveling | 9 rollers |
| Material for Rollers | GCr15 steel |
| Hardness for Heat Treatment | HRC55 – 57 |
| Motor Power | 3.0 kw |
| Leveling Speed | 8 meters / minute |
| Power Transition | by Chains & Gears |
3.Feeding Device——1 Set
| Max. Width | 250 mm |
| Max. Thickness | 3.0 mm |
| Rollers for Feeding | 4 rollers |
| Material for Rollers | GCr15 steel |
| Hardness for Heat Treatment | HRC 55 – 57° |
| Servo Motor | 1.3 kw, Japanese |
| Feeding Speed | 0 – 10 Meters / Minute |
| Power Transition | by Gears |
4.Hydraulic Punching Machine——1 Set
| Working Pressure | 80 Tons |
| Hydraulic station motor power | 15.0 kw |
| Stoke Per Minute | 25 Strokes / Minute |
| Punching Mold | 1 Set |
| Hole-Punching Modular | 1 Set, 70 mm / Stroke = 2 Rows / Strokes |
| Brand | Yangli, China; Top One In China |
5.Roll Forming Machine——1 Set
| Rollers | 22 Nos. |
| Material for Rollers | Cr12Mov steel |
| Hardness for Heat Treatment | HRC57 – 59 |
| Roller Main Shaft | Ø 72 mm, 45# Steel |
| Bearing | HRB, China; 60312 |
| Main Machine Side-Wall Thickness | 35 mm |
| Motor Power | 11.0 kw, 350 Gearbox, each 2 sets |
| Rolling Speed | 6 meters / minute |
| Arc welding machine | 1 set |
| Arc welding speed | 1.5-3 meters per minute |
| Speed Control | By Frequency Converter |
| Power Transition | by Chains & Gears |
| Equipped with Water Coolant System | √ |
6.Hydraulic Saw Cutting Device——1 Set
| Cut-Off Type | Hydraulic; Saw; Automatic Cut-Off |
| Cut-Off Station | 1 Set |
| Hydraulic cutting motor power | 3.0 kw |
| Hydraulic Pump Stand Motor | 0.75 kw |
| Cutting Method | not stop to cut, fast cut |
| Length Tolerance Controller | By Pneumatic Hole Location |
7.Run-Out Table——1 Set
| Table Length | 6 Meters |
| Structure | Welded By Angle Iron |
| Discharge Structure | By Pneumatic Cylinder |
8.Electronic Control System——1 Unit
| PLC | Mitsubishi, Japan |
| Frequency Converter | Japan |
| Touchable Screen | Mitsubishi, Japan |
| Servo Motor | Yaskawa, Japan |
| Main Electronic Components | Schneider, France Or Shilin, Taiwan |
| Power Supplier | 380 V, 50Hz, 3Phs |
Machine Details
Machine Video
Related Machines
Thank you for choosing LMS Racking & Shelving Machinery.
Need a quote or further information? If you find cheaper prices for the same goods, we will match them!
Sales hotline:
+86 15920110298
WhatsApp:
E-mail:
sales@shelvingmachinery.com
Address:
20F/AB Zhongqiao Building, 76 Xianlie Middle Road, Yuexiu District, Guangzhou, Guangdong, China P.R.
sales@shelvingmachinery.com
0086-15920110298
20F/AB Zhongqiao Building, 76 Xianlie Middle Road, Yuexiu District, Guangzhou, Guangdong, China P.R.
Other links
在线客服添加返回顶部
右侧在线客服样式 1,2,3 4
图片alt标题设置： LMS Machinery
表单验证提示文本： Content cannot be empty!
循环体没有内容时： Sorry,no matching items were found.
CSS / JS 文件放置地