0086-15920110298
LMS Supermarket Storage Rack Shelf Panel Roll Forming Machine
Do you need a quote or more information?
- 产品描述
-
- Commodity name: LMS Supermarket Storage Rack Shelf Panel Roll Forming Machine
Machine Description
Production Flow:
Material – Decoiling – Leveling – Hydraulic Punching – Roll Forming – Hydraulic Cutting-Off – Final Profile
1. Decoiler——1 Set
Max. Width 800 mm Inner Diameter Ø 460 - Ø 520 mm Max. Loading Capacity 5,000 KGS Outer diameter Ø 1600mm Operating type Manual expansion to tighten the coil 2. Straightening Device——1 Set
Feeding width 800mm Feeding thickness 1.0mm Roller numbers 9 groups Heat treatment HRC55°~57° Motor 4 kw Speed 8m/min 3. Feeding Device
Feeding width 800mm Feeding thickness 1.0mm Roller numbers 4 groups Roller’s Material GCr15 steel Roller’s Hardness HRC 55°~57 Motor 1.8kw(Japan brand) Speed 0~15m/min 4. Hydraulic Punching Machine——1 Set
With hydraulic punching machine One set With two set of punching and notching mould Hydraulic stand one set 5.5kw 5. Roll Forming Machine——1 Set
The product width adjustment adopts the overall movement adjustment mode Group of roller 24 groups Material Cold rolled steel and GI Material Thickness 0.8 mm Roller’s Material Gr15 steel Roller’s Hardness HRC 55°~57 Roller Shaft diameter 50mm, 45# steel Drive mode Chain and gear drive Main Motor 7.5 KW, Cycloidal reducer(two set) Roll Forming Speed 2~6 meters / minute With water cooling device 6.Hydraulic Cutting-Off Device——1 Set
Adopt hydraulic cut-off and bending device 1 set Equip with cutting and bending mould 1 set (cut-off with waste materials) Material of cutting mould/die Cr12MOV steel Hardness for Treatment HRC57°– 59° Hydraulic Pump Stand Motor 5.5 KW Stop-cutting mode 7. Run-Out Table——1 Set
Table Length 3 meters Structure Welded by channel steel Discharge Normal 8. Electronic Control System——1 Unit
Frequency converter Japanese Brand PLC Mitsubishi, Japanese.With HMI and servo motor Length Control length control by air cylinder fix hole and cut off Main Electronic Components Taiwan SHILIN OR SCHNEIER Cut Mode Stop TO CUT Power Supplier 380 V, 50Hz, 3Phs Machine Details
Machine Video
Machine Description
Production Flow:
Material – Decoiling – Leveling – Hydraulic Punching – Roll Forming – Hydraulic Cutting-Off – Final Profile
1. Decoiler——1 Set
| Max. Width | 800 mm |
| Inner Diameter | Ø 460 - Ø 520 mm |
| Max. Loading Capacity | 5,000 KGS |
| Outer diameter | Ø 1600mm |
| Operating type | Manual expansion to tighten the coil |
2. Straightening Device——1 Set
| Feeding width | 800mm |
| Feeding thickness | 1.0mm |
| Roller numbers | 9 groups |
| Heat treatment | HRC55°~57° |
| Motor | 4 kw |
| Speed | 8m/min |
3. Feeding Device
| Feeding width | 800mm |
| Feeding thickness | 1.0mm |
| Roller numbers | 4 groups |
| Roller’s Material | GCr15 steel |
| Roller’s Hardness | HRC 55°~57 |
| Motor | 1.8kw(Japan brand) |
| Speed | 0~15m/min |
4. Hydraulic Punching Machine——1 Set
| With hydraulic punching machine | One set |
| With two set of punching and notching mould | |
| Hydraulic stand one set | 5.5kw |
5. Roll Forming Machine——1 Set
| The product width adjustment adopts the overall movement adjustment mode | |
| Group of roller | 24 groups |
| Material | Cold rolled steel and GI |
| Material Thickness | 0.8 mm |
| Roller’s Material | Gr15 steel |
| Roller’s Hardness | HRC 55°~57 |
| Roller Shaft diameter | 50mm, 45# steel |
| Drive mode | Chain and gear drive |
| Main Motor | 7.5 KW, Cycloidal reducer(two set) |
| Roll Forming Speed | 2~6 meters / minute |
| With water cooling device |
6.Hydraulic Cutting-Off Device——1 Set
| Adopt hydraulic cut-off and bending device | 1 set |
| Equip with cutting and bending mould | 1 set (cut-off with waste materials) |
| Material of cutting mould/die | Cr12MOV steel |
| Hardness for Treatment | HRC57°– 59° |
| Hydraulic Pump Stand Motor | 5.5 KW |
| Stop-cutting mode |
7. Run-Out Table——1 Set
| Table Length | 3 meters |
| Structure | Welded by channel steel |
| Discharge | Normal |
8. Electronic Control System——1 Unit
| Frequency converter | Japanese Brand |
| PLC | Mitsubishi, Japanese.With HMI and servo motor |
| Length Control | length control by air cylinder fix hole and cut off |
| Main Electronic Components | Taiwan SHILIN OR SCHNEIER |
| Cut Mode | Stop TO CUT |
| Power Supplier | 380 V, 50Hz, 3Phs |
Machine Details
Machine Video
Related Machines
Thank you for choosing LMS Racking & Shelving Machinery.
Need a quote or further information? If you find cheaper prices for the same goods, we will match them!
Sales hotline:
+86 15920110298
WhatsApp:
E-mail:
sales@shelvingmachinery.com
Address:
20F/AB Zhongqiao Building, 76 Xianlie Middle Road, Yuexiu District, Guangzhou, Guangdong, China P.R.
sales@shelvingmachinery.com
0086-15920110298
20F/AB Zhongqiao Building, 76 Xianlie Middle Road, Yuexiu District, Guangzhou, Guangdong, China P.R.
Other links
在线客服添加返回顶部
右侧在线客服样式 1,2,3 4
图片alt标题设置： LMS Machinery
表单验证提示文本： Content cannot be empty!
循环体没有内容时： Sorry,no matching items were found.
CSS / JS 文件放置地